Mini Bionic Robot Hand
It uses a servo to drive, you had better choose our servo, the different servo size and hole is not necessarily universal.
It is structure with occasional updates, may have small differences with picture, type prevail.
A notice:
Installation requires some patience and hands-on ability. Like playing with blocks, no pressure. Please leave your email or ask online for installation instructions.
Beware of servo locked-rotor.servo working voltage: 6-8.4V (default 7.2V), the servo black, red, white lines correspond to negative, positive and signal lines.
The price of all products in our store is standard without taxes.
6 Way knob steering gear controller:
1) can control 6 steering gears 1 to 1, real-time synchronization 1:1 control.
2) No.0, No.1 and No.2 of the control board have overcurrent protection to prevent excessive current from burning out the steering gear.
3) there is a small button under each button of the control panel, when you press it, the steering gear is in the middle state, the knob can not control the rotation of the steering gear, press again to remove the middle state, and the knob can continue to control the steering gear.
Parameters of Mini Bionic Robot Hand
Size: 76mm * 53mm
Weight: 37g
Wiring instructions:
+: Connect to 5 ~ 8.4 V power supply.
-: Connects to the negative pole of the power supply.
Generally, the steering gear control needs a few V, you can give the control board with a 5V.
Size chart:(mm)
Reviews
There are no reviews yet.